90-Watt Dimmable IP67 LED Driver with PWM Output
PWM-90
The MEAN WELL PWM-90 series of LED drivers have a PWM output for even dimming, regardless of the load on the LED driver. The IP67 rated enclosure provides resistance to dust and moisture ingress. These constant voltage LED drivers can also operate in constant current mode at their maximum current rating. For added efficiency they have built-in power factor correction.
The standard models can be dimmed by the following methods:
- 0-10V dimming
- PWM dimming
- Applying resistance
There is also a DALI and DALI-2 option available. The DALI-2 models are backward compatible with DALI.
Note: Not all models in this series carry Australian electrical safety approvals. Models with a part number including -AUP have a fitted Australian flex & plug and the correct electrical safety certification for Australia.
If you wish to use any of the other models listed in Australia, please contact our office for assistance.
See table below for models in the range.
Images are for reference only, refer to product data sheet
IMPORTANT
MUST BE INSTALLED BY A LICENSED ELECTRICIAN
Models in this series
Output |
Input |
||||
|---|---|---|---|---|---|
| DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
| PWM-90-12 | 12V | 90W | 7.7A | 88.00% | 90~305VAC |
| PWM-90-12-AUP | 12V | 90W | 7.5A | 88.00% | 90 ~ 305VAC - Australian flex & plug |
| PWM-90-12DA (DALI) | 12V | 90W | 7.5A | 88.00% | 90~305VAC |
| PWM-90-12DA-AUP (DALI) | 12V | 90W | 7.5A | 88.00% | 90 ~ 305VAC - Australian flex & plug |
| PWM-90-12DA2 (DALI-2) | 12V | 90W | 7.5A | 88.00% | 90~305VAC |
| PWM-90-24 | 24V | 90W | 3.75A | 90.50% | 90~305VAC |
| PWM-90-24-AUP | 24V | 90W | 3.75A | 90.50% | 90 ~ 305VAC - Australian flex & plug |
| PWM-90-24DA (DALI) | 24V | 90W | 3.75A | 90.50% | 90 ~ 305VAC |
| PWM-90-24DA2 (DALI-2) | 24V | 90W | 3.75A | 90.50% | 90~305VAC |
| PWM-90-24DA2-AUP (DALI-2) | 24V | 90W | 3.75A | 90.50% | 90 ~ 305VAC - Australian flex & plug |
| PWM-90-36 | 36V | 90W | 2.5A | 90.50% | 90~305VAC |
| PWM-90-36-AUP | 36V | 90W | 2.5A | 90.50% | 90 ~ 305VAC - Australian flex & plug |
| PWM-90-36DA (DALI) | 36V | 90W | 2.5A | 90.50% | 90~305VAC |
| PWM-90-36DA2 (DALI-2) | 36V | 90W | 2.5A | 90.50% | 90~305VAC |
| PWM-90-48 | 48V | 90.24W | 1.88A | 90.50% | 90 ~ 305VAC |
| PWM-90-48DA (DALI) | 48V | 90.24W | 1.88A | 90.50% | 90~305VAC |
| PWM-90-48DA2 (DALI-2) | 48V | 90.24W | 1.88A | 90.50% | 90 ~ 305VAC |
