Low Cost 150-Watt IP67 Constant Voltage LED Driver
XLG-150
The MEAN WELL XLG-150 series of constant voltage LED drivers are available through ADM Systems with a factory fitted Australian flex & plug. The IP67 rated rugged metal enclosure is resistant to both dust and moisture ingress.
It should be noted that when mounting outdoors, these LED drivers should not be positioned in direct sunlight. This could cause the temperature inside the LED driver to exceed its maximum working temperature, which has the potential to cause a failure. Such failures are not covered by the warranty.
Note: This LED driver is approved for use in Australia in commercial applications only. Please contact us if you have any questions about Australian electrical safety certification.
See table below for models in the range.
Images are for reference only, refer to product data sheet
IMPORTANT
MUST BE INSTALLED BY A LICENSED ELECTRICIAN
Models in this series
Output |
Input |
||||
|---|---|---|---|---|---|
| DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
| XLG-150-12-AUP | 12V | 150W | 12.5A | 91.50% | 100 ~ 305VAC |
| XLG-150-24-AUP | 24V | 150W | 6.25A | 93.00% | 100 ~ 305VAC |
