160-Watt Desktop Battery Charger with Kettle Plug Inlet
GC160
The MEAN WELL GC160 series battery chargers can be used to charge lead acid batteries (flooded, Gel, and AGM) and li-ion batteries (lithium iron and lithium manganese). The universal full range AC input means this battery charger is compatible with most AC mains supply systems. All models feature active power factor correction.
These chargers give you 2-stage charging and a low no-load power consumption of less than 1 Watt. There are 2 DC output connector options: A 4-pin DIN connector or an Anderson connector.
Note: This battery charger does not carry Australian electrical safety approvals. Please contact our office for assistance If you wish to use this item in Australia.
Please refer to table below for models in the range:
Images are for reference only, refer to product data sheet
Models in this series
Output |
Input |
||||
|---|---|---|---|---|---|
| DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
| GC160A12-R7B (4-pin DIN) | 13.6V for 12V batteries | 136W | 10A | 89.00% | 85~264VAC |
| GC16012A-AD1 Anderson connector | 13.6V for 12V batteries | 136W | 10A | 89.00% | 85~264VAC |
| GC160A24-R7B 4-pin DIN | 27.2V for 24V batteries | 160.2W | 5.89A | 92.50% | 85~264VAC |
| GC160A24-AD1 Anderson connector | 27.2V for 24V | 160.2W | 5.89A | 92.50% | 85~264VAC |
| GC160A48-R7B 4-pin DIN | 54.4V for 48V batteries | 160.5W | 2.95A | 94.00% | 85~264VAC |
| GC160A48-AD1 Anderson connector | 54.4V | 160.5W | 2.95A | 94.00% | 85~264VAC |
