35-Watt DALI Constant Current LED Driver with Selectable Output
LCM-40UDA
The MEAN WELL LCM-40UDA is an advanced DALI constant current LED driver with selectable output current. The current setting is via a DIP switch under the blue cover.
This LED driver has built-in power factor correction and up to 10 units can be connected in a Master / Slave configuration for synchronous control.
This is a class II device, so the casing doesn't need to be earthed.
A model is available with a 12V / 50mA auxiliary power output.
The LCM-40UDA also boasts a low no-load power consumption.
Note: This LED driver does not carry Australian electrical safety approvals. Please contact our office for assistance If you wish to use this LED driver in Australia.
Images are for reference only, refer to product data sheet
Disclaimer
Due to demonstrated incompatibilities between some DALI systems, it is strongly recommended that all DALI products are tested with intended equipment before installation. DALI drivers which are incompatible with untested applications will not be accepted back as warranty claims if they are not tested as being faulty.
Models in this series
Output |
Input |
||||
|---|---|---|---|---|---|
| DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
| LCM-40UDA | 2~100V (refer to data sheet) | 35W | 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA | 87.50% | 90~132VAC |
| LCM-40UDA-AUX (Aux Power Output) | 2~100V (refer to data sheet) | 35W | 350mA, 500mA, 600mA, 700mA (default), 900mA, 1050mA | 87.50% | 90~132VAC |
