60W IP67 Constant Voltage LED Driver
LPV-60
The MEAN WELL LPV-60 series LED drivers are a low-cost IP 67 constant voltage LED driver. They are classified as class II power supply, so the casing does not need to be earthed. The LPV-60 LED drivers can withstand a 300VAC input surge for 5 seconds.
Its IP67 ingress protection rating means it is resistant to dust and water ingress. However, if the LED driver is to be used outdoors, it should not be mounted in direct sunlight. This could cause the temperature in the driver to exceed the maximum operating temperature. This has the potential to result in a failure that would not be covered by the warranty.
Note: This LED driver does not carry Australian electrical safety approvals. Please contact our office for assistance If you wish to use this LED driver in Australia.
Images are for reference only, refer to product data sheet
Models in this series
Output |
Input |
||||
|---|---|---|---|---|---|
| DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
| LPV-60-5 | 5V | 40W | 8A | 76.00% | 90~264VAC |
| LPV-60-12 | 12V | 60W | 5A | 83.00% | 90~264VAC |
| LPV-60-15 | 15V | 60W | 4A | 83.00% | 90~264VAC |
| LPV-60-24 | 24V | 60W | 2.5A | 86.00% | 90~264VAC |
| LPV-60-36 | 36V | 60W | 1.67A | 86.00% | 90~264VAC |
| LPV-60-48 | 48V | 60W | 1.25A | 86.00% | 90~264VAC |
