120-Watt IP67 LED Driver with US AC Plug
OWA-120U
Description
The MEAN WELL OWA-120U series of LED drivers have a factory fitted US type AC plug and is fitted with a 4-pin DIN DC output connector.
The IP67 protection rating ensures the LED driver is resistant to dust and moisture ingress. However, they should not be mounted in direct sunlight, as this could cause the temperature inside the driver to exceed its specified maximum operating temperature. This has the potential to cause a failure that would not be covered by the warranty.
Note: This LED driver does not carry Australian electrical safety approvals. Please contact our office for assistance If you wish to use this LED driver in Australia.
See table below for models in the range.
Image
Images are for reference only, refer to product data sheet
Models in this series
Output |
Input |
||||
|---|---|---|---|---|---|
| DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
| OWA-120U-12 | 12V | 120W | 10A | 87.00% | 90~264VAC |
| OWA-120U-15 | 15V | 120W | 8A | 88.00% | 90~264VAC |
| OWA-120U-20 | 20V | 120V | 6A | 89.00% | 90~264VAC |
| OWA-120U-24 | 24V | 120W | 5A | 89.50% | 90~264VAC |
| OWA-120U-30 | 30V | 120W | 4A | 89.00% | 90~264VAC |
| OWA-120U-36 | 36V | 122.4W | 3.4A | 89.00% | 90~264VAC |
| OWA-120U-42 | 42V | 121.8W | 2.9A | 89.50% | 90~264VAC |
| OWA-120U-54 | 54V | 124.2W | 2.3A | 89.50% | 90~264VAC |
