20-Watt IP67 Constant Current LED Driver
XLG-20
The XLG-20 series LED drivers feature a rugged IP67 rated metal enclosure, which is resistant to moisture and dust ingress.
There are 3 current output options: 350mA, 500mA, and 700mA. You can choose between non-dimming and dimmable variants. The dimmable type can be controlled via one of the following methods:
- 1-10V dimming
- PWM dimming (this LED driver does not have a PWM output)
- Applying resistance
It should be noted that when mounting outdoors, these LED drivers should not be positioned in direct sunlight. This could cause the temperature inside the LED driver to exceed its maximum working temperature, which has the potential to cause a failure. Such failures are not covered by the warranty.
Note: This LED driver is approved for use in Australia in commercial applications only. Please contact us if you have any questions about Australian electrical safety certification.
See table below for models in the range.
Images are for reference only, refer to product data sheet
IMPORTANT
MUST BE INSTALLED BY A LICENSED ELECTRICIAN
Models in this series
Output |
Input |
||||
|---|---|---|---|---|---|
| DC Voltage | Power | Rated Current | Input Efficiency | Input Voltage | |
| XLG-20-L | 32.4 ~ 54V | 18.9W | 350mA | 89.00% | 90~305VAC |
| XLG-20-L-B (Dimmable) | 32.4 ~ 54V | 18.9W | 350mA | 89.00% | 90~305VAC |
| XLG-20-M | 25.2 ~ 42V | 21W | 500mA | 88.50% | 90~305VAC |
| XLG-20-M-B (Dimmable) | 25.2 ~ 42V | 21W | 500mA | 88.50% | 90~305VAC |
| XLG-20-H | 18 ~ 30V | 21W | 700mA | 88.00% | 90~305VAC |
| XLG-20-H-B (Dimmable) | 18 ~ 30V | 21W | 700mA | 88.00% | 90~305VAC |
